Alignment Target is one of the most important components of a machine. It is a product developed independently by us. We have chosen to use current materials to make the target through continuous experimentation. The current target is particularly stable, ensuring that there will be no deviation in the data during the measurement process.

1. Characteristic of the Alignment Target
We have gone through a lot of research and development from the first generation of big targets to the current mini targets. We have simplified our research and development on the basis of the first- generation products, and developed mini targets that are lighter and easier to operate. We are still conducting invisible coverage on the targets surface, so its interference ability is extremely strong, ensuring accurate data measurement.

2. Installation of the Alignment Target
Before the machine leaves the factory, the target has been fixed on the clamp and marked on the clamps, front, back, left, and right. After installing the clamp claw head on site, it can start working. When measuring, the small target is fixed on the front wheel and the large target is fixed on the rear wheel. If it is necessary to replace the target, it should be noted that the small target must be installed on the front wheel clamp and the large target must be installed on the rear wheel clamp.

3. FAQ of the Alignment Target
1) Are the four targets divided into front and rear directions?
Of course. Two small targets are hanging on the front wheel, and two large targets are hanging on the rear wheel.

2) Do we need to pay attention to the four targets?
Be careful not to get dirty on the target surface and avoid direct sunlight.

Hot Tags: alignment target, China alignment target manufacturers, suppliers, factory, Wheel Alignment Machine, Alignment Camera, Wheel Alignment Turntable, Car Wheel Alignment Machine, 3D Wheel Alignment Machine, Wheel Alignment Equipment